161 citations as recorded by crossref.

1. An autonomous, in situ light‐dark bottle device for determining community respiration and net community production J. Collins et al. 10.1002/lom3.10247
2. Characterization and biofouling potential analysis of two cyanobacterial strains isolated from Cape Verde and Morocco M. Romeu et al. 10.1093/femsec/fiad004
3. Exploring local chlorine generation through seawater electrolysis to Extend optical sensor lifespan in marine environments T. Matos et al. 10.1016/j.cej.2024.156836
4. Preparation and evaluation of fouling-release properties of amphiphilic perfluoropolyether-zwitterion cross-linked polymer films A. Ruiz-Sanchez et al. 10.1016/j.porgcoat.2019.105524
5. Micro- and nanotechnologies in plankton research J. Mohammed 10.1016/j.pocean.2015.03.010
6. Technical note: Assessing gas equilibration systems for continuous <i>p</i>CO<sub>2</sub> measurements in inland waters T. Yoon et al. 10.5194/bg-13-3915-2016
7. Anti-fouling activity and toxicity of the Mediterranean alien sponge Paraleucilla magna Klautau, Monteiro & Borojevic, 2004 (Porifera, Calcarea) C. Longo et al. 10.7717/peerj.12279
8. Development, Optimization, Biological Assays, and In Situ Field Immersion of a Transparent Piezoelectric Vibrating System for Antifouling Applications L. Grilli et al. 10.3390/act11020047
9. The preparation and performance tuning of Co/Ni based catalysts for chlorine evolution reaction L. Li et al. 10.1016/j.jiec.2024.02.015
10. Path to Impact for Autonomous Field Deployable Chemical Sensors: A Case Study of in Situ Nitrite Sensors T. Schierenbeck & M. Smith 10.1021/acs.est.6b06171
11. Internet of Things in aquaculture: A review of the challenges and potential solutions based on current and future trends H. Rastegari et al. 10.1016/j.atech.2023.100187
12. Boron Doped Diamond as a Low Biofouling Material in Aquatic Environments: Assessment of Pseudomonas aeruginosa Biofilm Formation L. Simcox et al. 10.1021/acsami.9b07245
13. Biofouling protection for marine optical windows by electrolysis of seawater to generate chlorine using a novel Co-based catalyst electrode S. Lou et al. 10.1016/j.colsurfa.2022.128270
14. Antifouling Strategies for Sensors Used in Water Monitoring: Review and Future Perspectives A. Delgado et al. 10.3390/s21020389
15. Real-time monitoring of chemical water quality in closed-loop hydroponics Ø. Jakobsen et al. 10.17660/ActaHortic.2020.1296.127
16. Applications of Wireless Sensor Networks in Marine Environment Monitoring: A Survey G. Xu et al. 10.3390/s140916932
17. A novel design and application of anti-biofouling system of buoy sensor based on sampling measuring method L. Li et al. 10.1088/1742-6596/2770/1/012008
18. In-situ long-period monitoring of suspended particulate matter dynamics in deep sea with digital video images H. Wang et al. 10.3389/fmars.2022.1011029
19. WILMO: an automated profiling system for coastal waters S. Deschner et al. 10.3389/fmars.2024.1450207
20. Antifouling properties of zinc oxide nanorod coatings M. Al-Fori et al. 10.1080/08927014.2014.942297
21. Recommendations for Plankton Measurements on OceanSITES Moorings With Relevance to Other Observing Sites E. Boss et al. 10.3389/fmars.2022.929436
22. Challenges and Opportunities in Calibrating Low-Cost Environmental Sensors N. Nalakurthi et al. 10.3390/s24113650
23. Marine Biofouling on Moored Buoys and Sensors in the Northern Indian Ocean R. Venkatesan et al. 10.4031/MTSJ.51.2.11
24. An R package for correcting continuous water quality monitoring data for drift A. Shaughnessy et al. 10.1007/s10661-019-7586-x
25. Characterization of planktonic and biofilm cells from two filamentous cyanobacteria using a shotgun proteomic approach M. Romeu et al. 10.1080/08927014.2020.1795141
26. Pt nanostructure from electrodeposition: Electrocatalyst to generate chlorine for marine biofouling inhibition Z. Shi et al. 10.1016/j.colsurfa.2017.02.015
27. Graphene-Based Coating to Mitigate Biofilm Development in Marine Environments F. Sousa-Cardoso et al. 10.3390/nano13030381
28. Hydrodynamic conditions affect the proteomic profile of marine biofilms formed by filamentous cyanobacterium M. Romeu et al. 10.1038/s41522-022-00340-w
29. Synthesis and application of a perfluorinated coumarin surfactant as an antifouling coating H. Bouzekri et al. 10.54021/seesv5n2-224
30. The Use of 3D Optical Coherence Tomography to Analyze the Architecture of Cyanobacterial Biofilms Formed on a Carbon Nanotube Composite M. Romeu et al. 10.3390/polym14204410
31. Self-Sterilizing Polymeric Membrane Sensors Based on 6-Chloroindole Release for Prevention of Marine Biofouling T. Jiang et al. 10.1021/acs.analchem.0c03099
32. Spray‐Painted Hydrogel Coating for Marine Antifouling J. Yang et al. 10.1002/admt.202000911
33. 3D printing technology meets marine biofouling: A study on antifouling resin for protecting marine sensors Z. Deng et al. 10.1016/j.addma.2023.103697
34. Antifouling performance of copper-containing fused filament fabrication (FFF) 3-D printing polymer filaments for marine applications R. Piola et al. 10.1080/08927014.2021.1892085
35. Development of Antifouling Strategies for Marine Applications M. Romeu & F. Mergulhão 10.3390/microorganisms11061568
36. Electrochemical (pre)treatments to prevent biofouling C. Debiemme-Chouvy & H. Cachet 10.1016/j.coelec.2018.07.006
37. Polysiloxane-Based Block Copolymers with Marine Bacterial Anti-Adhesion Properties T. Duong et al. 10.1021/acsami.5b04234
38. Astronomical and atmospheric impacts on deep-sea hydrothermal vent invertebrates Y. Lelièvre et al. 10.1098/rspb.2016.2123
39. Scaling-Up Seeded Hydrothermal Nanowire Synthesis on Non-planar Surfaces Using a Flow Reactor A. Ortiz-Ortiz et al. 10.1021/acsaenm.3c00129
40. Buzz off! An evaluation of ultrasonic acoustic vibration for the disruption of marine micro-organisms on sensor-housing materials J. McQuillan et al. 10.1111/lam.12671
41. Rational Design of Transparent Nanowire Architectures with Tunable Geometries for Preventing Marine Fouling J. Wang et al. 10.1002/admi.202000672
42. What Limits Our Understanding of Oceans? Challenges in Marine Instrumentation A. Nair et al. 10.1080/09747338.2020.1715268
43. Design of an efficient antifouling strategy for underwater optical window based on chlorine generation S. Zhang et al. 10.1016/j.colsurfa.2021.127922
44. Autonomous marine environmental monitoring: Application in decommissioned oil fields D. Jones et al. 10.1016/j.scitotenv.2019.02.310
45. UVC-Based Biofouling Suppression for Long-Term Deployment of Underwater Cameras P. Hoeher et al. 10.1109/JOE.2023.3265164
46. Non-toxic antifouling potential of Caatinga plant extracts: effective inhibition of marine initial biofouling V. Agostini et al. 10.1007/s10750-019-04071-6
47. Morphology regulation and application of nano cobalt oxide (Co3O4) electrocatalysts for chlorine evolution toward marine anti-biofouling H. Wang et al. 10.1016/j.jcis.2022.08.004
48. Role of Flagella in Adhesion of Escherichia coli to Abiotic Surfaces R. Friedlander et al. 10.1021/acs.langmuir.5b00815
49. Biomimetic surface coatings for marine antifouling: Natural antifoulants, synthetic polymers and surface microtopography L. Chen et al. 10.1016/j.scitotenv.2020.144469
50. Assessment of the Antibiofilm Performance of Chitosan-Based Surfaces in Marine Environments M. Lima et al. 10.3390/ijms232314647
51. Uncertainties associated with in situ high-frequency long-term observations of suspended particulate matter concentration using optical and acoustic sensors M. Fettweis et al. 10.1016/j.pocean.2019.102162
52. Bioinspiration and Microtopography As Nontoxic Strategies for Marine Bioadhesion Control E. Védie et al. 10.1002/admi.202100994
53. Oil Spill Detection Using Fluorometric Sensors: Laboratory Validation and Implementation to a FerryBox and a Moored SmartBuoy S. Pärt et al. 10.3389/fmars.2021.778136
54. An Approach to Modeling Biofilm Growth During the Flocculation of Suspended Cohesive Sediments X. Shen et al. 10.1029/2018JC014493
55. Construction of novel fluorescent synergistic photocatalytic double Z-scheme photocatalyst for efficient antifouling of polydimethylsiloxane coatings G. Xiong et al. 10.1016/j.porgcoat.2023.107575
56. The effects of diatom pore-size on the structures and extensibilities of single mucilage molecules I. Sanka et al. 10.1016/j.carres.2017.05.014
57. Corrosion protection of 304L stainless steel by chemical vapor deposited alumina coatings A. Lazar et al. 10.1016/j.corsci.2013.12.012
58. Bacterial biofilm or biofouling networks with numerous resilience factors from real water supplies of Chennai and their enhanced susceptibility to biocompatible nanoparticles S. Karthick Raja Namasivayam et al. 10.1016/j.jclepro.2019.05.199
59. The anti-bacterial effect of an electrochemical anti-fouling method intended for the protection of miniaturised oceanographic sensors J. McQuillan et al. 10.1016/j.mimet.2017.08.006
60. Maintenance-free antifouling polymeric membrane potentiometric sensors based on self-polishing coatings X. Wang et al. 10.1039/D4AN00351A
61. A universal AC electrokinetics-based strategy toward surface antifouling of underwater optics H. Jiang et al. 10.1038/s41598-024-66251-2
62. Carapace surface architecture facilitates camouflage of the decorator crab Tiarinia cornigera I. Sanka et al. 10.1016/j.actbio.2016.05.021
63. An implanted pH sensor read using radiography M. Arifuzzaman et al. 10.1039/C8AN02337A
64. Automatic real-time uncertainty estimation for online measurements: a case study on water turbidity J. Kahiluoto et al. 10.1007/s10661-019-7374-7
65. Early biofilm and streamer formation is mediated by wall shear stress and surface wettability: A multifactorial microfluidic study A. Chun et al. 10.1002/mbo3.1310
66. Novel Cu-bearing stainless steel: A promising food preservation material J. Zhao et al. 10.1016/j.jmst.2021.11.010
67. Energy harvesting techniques for sustainable underwater wireless communication networks: A review O. Alamu et al. 10.1016/j.prime.2023.100265
68. Development of ion-selective electrodes for antipyrine and its derivatives as potential tool for environmental water monitoring L. Mayerhuber et al. 10.1016/j.jelechem.2021.115110
69. Comparison of biofouling on 3D-printing materials in the marine environment M. Ryley et al. 10.1016/j.ibiod.2021.105293
70. Efficacy testing of novel antifouling systems for marine sensors N. Bloecher et al. 10.1016/j.oceaneng.2021.109983
71. A review of methods and instruments to monitor turbidity and suspended sediment concentration T. Matos et al. 10.1016/j.jwpe.2024.105624
72. Slippery liquid-infused surface from three-dimensional interconnecting net structure via breath figure approach and its usage for biofouling inhibition Y. Xiao et al. 10.1016/j.porgcoat.2018.06.012
73. Antifouling Performance of Carbon-Based Coatings for Marine Applications: A Systematic Review F. Sousa-Cardoso et al. 10.3390/antibiotics11081102
74. DEPLOY: a long term deployment of a water quality sensor monitoring system A. Lawlor et al. 10.1108/02602281211197125
75. Effects of laser irradiation on a bloom forming cyanobacterium Microcystis aeruginosa T. Li et al. 10.1007/s11356-016-7235-7
76. Removal of Microparticles by Ciliated Surfaces—an Experimental Study S. Zhang et al. 10.1002/adfm.201806434
77. Retrieval of missing values in water temperature series using a data-driven model I. Mulia et al. 10.1007/s12145-015-0210-x
78. Designing a transparent organogel layer with self-repairing property for the inhibition of marine biofouling H. Zhang et al. 10.1016/j.colsurfa.2017.10.079
79. Fabrication of Slippery Lubricant-Infused Porous Surface with High Underwater Transparency for the Control of Marine Biofouling P. Wang et al. 10.1021/acsami.6b09117
80. Analysis of drift characteristic in conductivity and temperature sensors used in Moored buoy system R. Venkatesan et al. 10.1016/j.oceaneng.2018.10.033
81. Biofilm formation behaviour of marine filamentous cyanobacterial strains in controlled hydrodynamic conditions M. Romeu et al. 10.1111/1462-2920.14807
82. Environmental Applications of Interfacial Materials with Special Wettability Z. Wang et al. 10.1021/acs.est.5b04351
83. The Relative Importance of Shear Forces and Surface Hydrophobicity on Biofilm Formation by Coccoid Cyanobacteria S. Faria et al. 10.3390/polym12030653
84. Sea-trial research on natural product-based antifouling paint applied to different underwater sensor housing materials H. Hao et al. 10.1016/j.ibiod.2022.105400
85. Marine antifouling performance of polymer coatings incorporating zwitterions C. Ventura et al. 10.1080/08927014.2017.1383983
86. Fast and easily applicable glycerol-based spray coating T. Becherer et al. 10.1016/j.porgcoat.2015.05.003
87. Polymeric Membrane Marine Sensors with a Regenerable Antibiofouling Coating Based on Surface Modification of a Dual-Functionalized Magnetic Composite Z. Liu et al. 10.1021/acs.analchem.2c02672
88. An eco-friendly process for prevention of biofouling G. Subramanian et al. 10.1016/j.porgcoat.2016.07.013
89. Periodic ultraviolet-C illumination for marine sensor antifouling A. MacKenzie et al. 10.1080/08927014.2019.1616698
90. Siloxy Silylester Methacrylate Diblock Copolymer-Based Coatings with Tunable Erosion and Marine Antifouling Properties M. Lejars et al. 10.1021/acsapm.0c00434
91. Net community oxygen production derived from Seaglider deployments at the Porcupine Abyssal Plain site (PAP; northeast Atlantic) in 2012–13 U. Binetti et al. 10.1016/j.pocean.2020.102293
92. Photoacoustic imaging-based in situ biofouling monitoring in underwater optical windows—A novel approach Q. Kong et al. 10.1016/j.oceaneng.2024.118546
93. Flexible and Biofouling Independent Salinity Sensor A. Kaidarova et al. 10.1002/admi.201801110
94. Preventing biofouling in microalgal photobioreactors Y. Soriano-Jerez et al. 10.1016/j.biortech.2024.131125
95. Biofouling and corrosion rate of welded Nickel Aluminium Bronze in natural and simulated seawater T. Dobson et al. 10.1080/08927014.2024.2326067
96. In situ glass antifouling using Pt nanoparticle coating for periodic electrolysis of seawater Y. Xue et al. 10.1016/j.apsusc.2015.08.232
97. Technical note: Measurements and data analysis of sediment–water oxygen flux using a new dual-optode eddy covariance instrument M. Huettel et al. 10.5194/bg-17-4459-2020
98. Regenerating heavily biofouled dissolved oxygen sensors using bacterial viruses F. Bayat et al. 10.1039/D0RA10156G
99. Development of a Cost-Effective Optical Sensor for Continuous Monitoring of Turbidity and Suspended Particulate Matter in Marine Environment T. Matos et al. 10.3390/s19204439
100. Biofouling on Salmon Pen Nets and Cleaner Fish Shelters Does Not Harbor Planktonic Stages of Sea Lice L. Jevne et al. 10.3389/fmars.2020.00727
101. Favoring the Selective H2O2 Generation of a Self-Antibiofouling Dissolved Oxygen Sensor for Real-Time Online Monitoring via Surface-Engineered N-Doped Reduced Graphene Oxide Y. Lin et al. 10.1021/acsami.3c07261
102. Self‐Cleaning Surfaces Realized by Biologically Sized Magnetic Artificial Cilia Z. Cui et al. 10.1002/admi.202102016
103. Antibiofouling strategy for optical sensors by chlorine generation using low-cost, transparent and highly efficient electrodes based on platinum nanoparticles coated oxide V. Pinto et al. 10.1016/j.cej.2020.126479
104. Assessment of Antifouling Potential of Novel Transparent Sol Gel Coatings for Application in the Marine Environment C. Richards et al. 10.3390/molecules24162983
105. A continuous, in-situ, near-time fluorescence sensor coupled with a machine learning model for detection of fecal contamination risk in drinking water: Design, characterization and field validation E. Bedell et al. 10.1016/j.watres.2022.118644
106. Micro-fabricated polydimethyl siloxane (PDMS) surfaces regulate the development of marine microbial biofilm communities G. Ling et al. 10.1080/08927014.2013.872778
107. Photonic methods and technologies for monitoring the ocean and atmosphere Y. Kulchin et al. 10.1070/QEL17222
108. A Test of Sol–Gel Incorporation of Organic Compounds as Translucent, Marine Biofouling-Resistant Windows M. Stokes 10.3390/jmse11040733
109. Sensor Enclosures: Example Application and Implications for Data Coherence G. Maniatis et al. 10.3390/jsan2040761
110. Design and implementation of a low-cost multiparameter probe to evaluate the temporal variations of water quality conditions on an estuarine lagoon system L. Méndez-Barroso et al. 10.1007/s10661-020-08677-5
111. Advanced strategies for marine antifouling based on nanomaterial-enhanced functional PDMS coatings X. Shi et al. 10.1016/j.nanoms.2023.12.005
112. Scientific considerations for acidification monitoring in the U.S. Mid-Atlantic Region K. Goldsmith et al. 10.1016/j.ecss.2019.04.023
113. A comparison of the biofouling potential of field-collected and laboratory-cultured Ulva K. Kurtz et al. 10.1080/08927014.2024.2403371
114. Developing transparent copper-doped diamond-like carbon films for marine antifouling applications Y. Liu et al. 10.1016/j.diamond.2016.08.012
115. Graphene Oxide/Silver Nanocomposites as Antifouling Coating on Sensor Housing Materials X. Zhang & Ø. Mikkelsen 10.1007/s10876-020-01953-x
116. Anti-fouling coatings for blood-contacting devices S. Yao et al. 10.1016/j.smaim.2023.10.001
117. Assessing the health of the in situ global surface marine climate observing system D. Berry & E. Kent 10.1002/joc.4914
118. Best Practices for the Ocean Moored Observatories R. Venkatesan et al. 10.3389/fmars.2018.00469
119. In-Situ Surface Modification of Terpinen-4-ol Plasma Polymers for Increased Antibacterial Activity A. Kumar et al. 10.3390/ma13030586
120. The Development of Polydimethysiloxane/ZnO–GO Antifouling Coatings X. Zhang et al. 10.1007/s10876-021-02165-7
121. Influences of marine biofouling on the potential responses of polymeric membrane ion-selective electrodes Z. Liu et al. 10.1016/j.snb.2024.136692
122. Recent Developments and Practical Feasibility of Polymer‐Based Antifouling Coatings A. Maan et al. 10.1002/adfm.202000936
123. Surface Conditioning Effects on Submerged Optical Sensors: A Comparative Study of Fused Silica, Titanium Dioxide, Aluminum Oxide, and Parylene C Z. Nan et al. 10.3390/s23239546
124. Electrochemical treatments using tin oxide anode to prevent biofouling C. Debiemme-Chouvy et al. 10.1016/j.electacta.2011.03.025
125. The POSEIDON Ocean Observing System: Technological Development and Challenges M. Ntoumas et al. 10.3390/jmse10121932
126. Operating Cabled Underwater Observatories in Rough Shelf-Sea Environments: A Technological Challenge P. Fischer et al. 10.3389/fmars.2020.00551
127. Sensors for Coastal and Ocean Monitoring C. Briciu-Burghina et al. 10.1146/annurev-anchem-091922-085746
128. In situ quantification of ultra‐low O 2 concentrations in oxygen minimum zones: Application of novel optodes M. Larsen et al. 10.1002/lom3.10126
129. A Self-Powered Wireless Water Quality Sensing Network Enabling Smart Monitoring of Biological and Chemical Stability in Supply Systems M. Carminati et al. 10.3390/s20041125
130. Biodegradable optically transparent terpinen-4-ol thin films for marine antifouling applications A. Kumar et al. 10.1016/j.surfcoat.2018.05.074
131. Anti-Biofouling and Self-Cleaning Surfaces Featured with Magnetic Artificial Cilia S. Zhang et al. 10.1021/acsami.0c05403
132. Long-lasting biofouling formation on transparent fouling-release coatings for the construction of efficient closed photobioreactors Y. Soriano-Jerez et al. 10.1080/08927014.2023.2228208
133. Biofouling and its effects in sensor mounted moored observatory system in Northern Indian Ocean R. Venkatesan et al. 10.1016/j.ibiod.2016.10.034
134. An Investigation into the application and practical use of (UV) ultraviolet light technology for marine antifouling E. Ryan et al. 10.1016/j.oceaneng.2020.107690
135. Solving Sensor Reading Drifting Using Denoising Data Processing Algorithm (DDPA) for Long-Term Continuous and Accurate Monitoring of Ammonium in Wastewater X. Wang et al. 10.1021/acsestwater.0c00077
136. Development of a Low-Cost Arduino-Based Sonde for Coastal Applications G. Lockridge et al. 10.3390/s16040528
137. Scalable Fabrication of Reversible Antifouling Block Copolymer Coatings via Adsorption Strategies A. Maan et al. 10.1021/acsami.3c01060
138. A facile hydrophilic modification strategy initiated by flame treatment of silicone coatings for marine antifouling application X. Xu et al. 10.1016/j.apsusc.2021.152177
139. Biomimicking Micropatterned Surfaces and Their Effect on Marine Biofouling A. Brzozowska et al. 10.1021/la502006s
140. High-Sensitivity Seawater Salinity Sensing With Cladding Etched Fiber Bragg Grating Technology J. Guo et al. 10.1109/JSEN.2023.3279324
141. Oxidation-Mediated, Zwitterionic Polydopamine Coatings for Marine Antifouling Applications D. Yeon et al. 10.1021/acs.langmuir.8b03454
142. Assessing Fluorescent Organic Matter in Natural Waters: Towards In Situ Excitation–Emission Matrix Spectroscopy O. Zielinski et al. 10.3390/app8122685
143. Improving the Environmental Compatibility of Marine Sensors by Surface Functionalization with Graphene Oxide T. Jiang et al. 10.1021/acs.analchem.9b03974
144. Recent Advances in Antibiofouling Materials for Seawater-Uranium Extraction: A Review P. Liu et al. 10.3390/ma16196451
145. Construction of corrosion resistant stainless steel mesh and the design for protecting optical window free from biofouling C. Chen et al. 10.1016/j.oceaneng.2022.112564
146. Water Quality Monitoring Using Wireless Sensor Networks K. Adu-Manu et al. 10.1145/3005719
147. Biomass estimation of an industrial raceway photobioreactor using an extended Kalman filter and a dynamic model for microalgae production F. García-Mañas et al. 10.1016/j.algal.2018.11.009
148. Real-Time Environmental Monitoring for Aquaculture Using a LoRaWAN-Based IoT Sensor Network H. Bates et al. 10.3390/s21237963
149. The impacts of biofouling on automated phosphorus analysers during long-term deployment Y. Chen & J. Crossman 10.1016/j.scitotenv.2021.147188
150. Research of Cu-bearing stainless steel with inhibition function of biofouling formation in freshwater environment H. Hong et al. 10.1016/j.jmrt.2023.12.165
151. Non-toxic, non-biocide-release antifouling coatings based on molecular structure design for marine applications A. Nurioglu et al. 10.1039/C5TB00232J
152. Developments and Challenges in Self‐Healing Antifouling Materials Z. Wang et al. 10.1002/adfm.201908098
153. How do Graphene Composite Surfaces Affect the Development and Structure of Marine Cyanobacterial Biofilms? M. Romeu et al. 10.3390/coatings12111775
154. Nanocomposite thin film of Ag nanoparticles embedded in amorphous Al 2 O 3 on optical sensors windows: Synthesis, characterization and targeted application towards transparency and anti-biofouling C. Tendero et al. 10.1016/j.surfcoat.2017.08.061
155. Antimicrobial Copper-Based Materials and Coatings: Potential Multifaceted Biomedical Applications D. Mitra et al. 10.1021/acsami.9b17815
156. Design and In Situ Validation of Low-Cost and Easy to Apply Anti-Biofouling Techniques for Oceanographic Continuous Monitoring with Optical Instruments T. Matos et al. 10.3390/s23020605
157. Fabrication of polydimethylsiloxane-attached solid slippery surface with high underwater transparency towards the antifouling of optical window for marine instruments W. Wang et al. 10.1016/j.jcis.2022.05.122
158. A Bayesian Framework for the Automated Online Assessment of Sensor Data Quality D. Smith et al. 10.3390/s120709476
159. Macrofouling of deep-sea instrumentation after three years at 3690m depth in the Charlie Gibbs fracture zone, mid-Atlantic ridge, with emphasis on hydroids (Cnidaria: Hydrozoa) R. Blanco et al. 10.1016/j.dsr2.2013.01.019
160. Microtopography of the eye surface of the crab Carcinus maenas : an atomic force microscope study suggesting a possible antifouling potential G. Greco et al. 10.1098/rsif.2013.0122
161. Acoustic methods for biofouling control: A review M. Legg et al. 10.1016/j.oceaneng.2015.04.070