Journal cover Journal topic
Ocean Science An interactive open-access journal of the European Geosciences Union
Journal topic

Journal metrics

IF value: 2.864
IF 5-year value: 3.337
IF 5-year
CiteScore value: 4.5
SNIP value: 1.259
IPP value: 3.07
SJR value: 1.326
Scimago H <br class='widget-line-break'>index value: 52
Scimago H
h5-index value: 30
Volume 13, issue 1
Ocean Sci., 13, 1–11, 2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 3.0 License.
Ocean Sci., 13, 1–11, 2017
© Author(s) 2017. This work is distributed under
the Creative Commons Attribution 3.0 License.

Technical note 13 Jan 2017

Technical note | 13 Jan 2017

Technical note: Update on response times, in-air measurements, and in situ drift for oxygen optodes on profiling platforms

Henry C. Bittig1 and Arne Körtzinger2,3 Henry C. Bittig and Arne Körtzinger
  • 1Sorbonne Universités, UPMC Université Paris 06, CNRS, UMR 7093, Laboratoire d'Océanographie de Villefranche (LOV), Villefranche-sur-Mer, France
  • 2GEOMAR Helmholtz-Zentrum für Ozeanforschung Kiel, Kiel, Germany
  • 3Christian-Albrechts-Universität zu Kiel, Kiel, Germany

Abstract. Oxygen optode measurements on floats and gliders suffer from a slow time response and various sources of drift in the calibration coefficients. Based on two dual-O2 Argo floats, we show how to post-correct for the effect of the optode's time response and give an update on optode in situ drift stability and in-air calibration. Both floats are equipped with an unpumped Aanderaa 4330 optode and a pumped Sea-Bird SBE63 optode. Response times for the pumped SBE63 were derived following Bittig et al. (2014) and the same methods were used to correct the time response bias. Using both optodes on each float, the time response regime of the unpumped Aanderaa optode was characterized more accurately than previously possible. Response times for the pumped SBE63 on profiling floats are in the range of 25–40 s, while they are between 60 and 95 s for the unpumped 4330 optode. Our parameterization can be employed to post-correct the slow optode time response on floats and gliders. After correction, both sensors agree to within 2–3 µmol kg−1 (median difference) in the strongest gradients (120 µmol kg−1 change over 8 min or 20 dbar) and better elsewhere. However, time response correction is only possible if measurement times are known, i.e., provided by the platform as well as transmitted and stored with the data. The O2 in-air measurements show a significant in situ optode drift of −0.40 and −0.27 % yr−1 over the available 2 and 3 years of deployment, respectively. Optode in-air measurements are systematically biased high during midday surfacings compared to dusk, dawn, and nighttime. While preference can be given to nighttime surfacings to avoid this in-air calibration bias, we suggest a parameterization of the daytime effect as a function of the Sun's elevation to be able to use all data and to better constrain the result. Taking all effects into account, calibration factors have an uncertainty of 0.1 %. In addition, in-air calibration factors vary by 0.1–0.2 % when using different reanalysis models as a reference. The overall accuracy that can be achieved following the proposed correction routines is better than 1 µmol kg−1.

Publications Copernicus